Components abrasive. Contracor EXTRA BLAST, TWINLINE, etc.

Abrasive blasting sleeves contracor are wear–resistant, statically neutral sandblasting sleeves. Designed for any type of sandblasting. The inner part of the sleeve is made of natural rubber with the highest resistance to abrasive wear.

Models: EXTRA BLAST-13, EXTRA BLAST-19, EXTRA BLAST-25, EXTRA BLAST-32.

Remote control sleeves contracor – double sleeves for connecting a remote control with a diameter of 6 mm in coils of 5, 20 or 40 meters.

Models: Twin-Line 5 m, Twin-Line 20 m, Twin-Line 40 m.

The air hoses contracor are designed to connect the helmet to the BAF breathing air filter.

Models: BAH 20m, BAH 40m.

PERFORMER contracor nozzles are the latest development in a series of highly efficient Venturi sandblasting nozzles. New wear-resistant carbide inserts combined with a lightweight and durable polyurethane shell.

Models: Performer 400 PUx11.0, Performer 400 pUX12.5, Performer 400 PUx6.5, Performer 400 PUx8.0, Performer 400 PUx9.5, Performer 400x5.0, Performer 400x6.5, Performer 400x8.0, Performer 400x9.5, Performer 400x11.0, Performer 400x12.5, Performer 600 PUx11.0, Performer 600 pUX12.5, Performer 600 PUx6.5, Performer 600 PUx8.0, Performer 600 PUx9.5, Performer 600x5.0, Performer 600x6.5, Performer 600x8.0, Performer 600x9.5, Performer 600x11.0, Performer 600x12.5, Performer 1000x5.0, Performer 1000x6.5, Performer 1000x8.0, Performer 1000x9.5, Performer 1000x11.0, Performer 1000x12.5.

CLASSIC TC contracor nozzles – these abrasive blasting nozzles with a Venturi channel provide a wide contact spot of the abrasive with the surface and allow you to fully preserve the kinetic energy (velocity) of the abrasive at the outlet of the nozzle. Venturi nozzles are the best choice for high productivity when processing large surfaces.

Models: RTC-6.5, RTC-8.0, RTC-9.5, RTC-11.0, RTC-12.5, CTC-6.5, CTC-8.0, CTC-9.5, CTC-11.0, CTC-12.5, DVTC-6.5, DVTC-8.0, DVTC-9.5, DVTC-11.0, DVTC-12.5, STC-5.0, STC-6.5, STC-8.0, STC-9.5, STC-11.0, STC-12.5, MTC-5.0, MTC-6.5, MTC-8.0, MTC-9.5, MTC-11.0, MTC-12.5, GTC-5.0, GTC-6.5, GTC-8.0, HTC-6.5, HTC-8.0, HTC-9.5, HTC-11.0, HTC-12.5.

CLASSIC B4C contracor nozzles – these abrasive blasting nozzles with a Venturi channel provide a wide contact spot of the abrasive with the surface and allow you to fully preserve the kinetic energy (velocity) of the abrasive at the outlet of the nozzle. The performance of Venutri channel nozzles is 40% higher than that of similar direct channel nozzles. In addition, the abrasive consumption is reduced to 40%.%

Models: SBC-6.5, SBC-8.0, SBC-9.5, UBC-6.5, UBC-8.0, UBC-9.5, UBC-11.0, UBC-12.5, DVBC-6.5, DVBC-8.0, DVBC-9.5, DVBC-11.0, DVBC-12.5, GBC-5.0, GBC-6.5, GBC-8.0, HBC-6.5, HBC-8.0, HBC-9.5, HBC-11.0, HBC-12.5.

ATC contracor angle nozzles are designed for cleaning hard–to—reach areas such as corners, backs of flanges or inner surfaces of pipes.

Models: ATC-5.0-1, ATC-5.0-2, ATC-5.0-3, ATC-6.5-1, ATC-6.5-2, ATC-6.5-3, ATC-8.0-1, ATC-8.0-2, ATC-8.0-3, ATC-9.5-1, ATC-9.5-2, ATC-9.5-3.

Bent BTC contracor nozzles are used for abrasive blasting of hard-to-reach areas such as corners, back sides of flanges, inner surfaces of pipes.

Models: BTC-8.0, BTC-9.5, BTC-11.0, BTC-12.5.

The nozzles for cleaning pipes contracor are designed for cleaning the inner surfaces of pipes.

Models: PTC-360, PTC-360 L.

The abrasive + water contracor nozzles are used for abrasive wetting and have been specially developed in response to the customer's increased need for economical, fast and environmentally friendly multi-purpose surface preparation.

Models: WBA, WBN-6.5, WBN-8.0, WBN-9.5, WBN-MINI-5.0, WBN-MINI-6.5, WBN-MINI-8.0.

Devices for internal pipe cleaning contracor ensure uniform circular spraying of the abrasive.

Models: PBT-1, PBT-2, PBT-2 ROTOBLAST.

Sandblaster lamps contracor are designed to illuminate the work area during sandblasting.

Models: ABL, ABL Set.

The nozzle holders contracor are designed to be mounted on an abrasive blasting sleeve.

Models: NHP-0, NHP-1, NHP-2, NHP-3/4.

Bayonet clutches contracor are designed for attachment to an abrasive blasting sleeve.

Models: CQP-0, CQP-1, CQP-2, CQP-3/4, CQT-0, CQT-1, CQT-2, CQT-3.

Safety cables for hoses contracor are designed for abrasive blasting hoses in case of spontaneous disconnection of hose couplings.

Models: 12321, 12322.

Sandblasting nozzles contracor are key elements of sandblasting equipment that form and accelerate the abrasive-air mixture applied to the surface to be cleaned.

Models: 10112510, 10112604, 10112829, 10112906, 29002001, 29010007, NTC-3.5, NTC-5.0, NTC-6.5, NTC-8.0, NTC(F)-6.5, NTC(F)-8.0, NTC(F)-9.5, PBN-5.0, PBN-6.5, PBN-8.0, PBN-9.5.